Our Application Services    

Network State Server
Know your network history
Readily available backups of device configuration files reduce the mean time to repair. Centralized log repository provides incident reference material and traffic statistics show network usage and provides for capacity planning.
*This application service is based on open source components.

Network Access Control
Control what your network is doing.
Using the open source NAC tool PacketFence, you can control access to your network environment. Trusted hosts are placed inside the network allowing access to internal resources while untrusted hosts are isolated to a DMZ VLAN providing them only access to the Internet.

The PacketFence configuration allows for a great number of possibilities depending on your needs, the network design and network hardware. Check your compatibility with PacketFence at PF-Switches&APs
*This application service is based on open source components.

Surf Recording & Control
Control what your users are doing
Granular internet monitoring and access control by host, user, application IP, and domain *eSubnet offers multiple solutions in this area, both licensed and open source.

Application Service Installation Requirements
While requirements vary, the following list provides the minimum hardware specification recommended by eSubnet:
  • Processor: 1 x Xeon / 1.4 GHz
  • RAM: 2 GB
  • HDD: 2 x 160 GB
  • Network: 2 x Ethernet 10Base-T/100Base-TX/1000Base-T
  • USB: 4 pin USB Type A
For reliable production class environments, it would be advisable to use server class hardware. Virtualized hardware equal to or better than the above recommendation is also supported.
eSubnet Services

Contact us regarding your network,
security and Internet services needs

All content © eSubnet 2003-2021